For sealed motor racing and Retro racing with a combination of tamper proof endbell/can and replaceable brushes with the same specs that everyone is using now.

This motor is based on our FK-MK1 series of motors and features poly/neo magnets, 65 turns of 30 gauge wire, 15 deg timing, with clockwise rotation from the can side. The shafts are long enough for Comm Coolers and endbell drive if desired.

The enbells are glued on, the tabs are crimped, they are drilled and tapped, screws installed can to endbell and our seals are used. These are the same specs as the current FK motors offered by other companies in this market place.

PS-4002FK Euro MK1 Motor, 65 turns of 30, 15 deg timing, poly neo magnets, glued on endbells, crimped tabs, drilled and tapped with screws installed can to endbell and then covered by our SpeedFX Seals.

Proslot recommends gearing the PS-4002FK with a overall gear ratio of 3.25 to 3.75 or to a "roll out" ratio of 4.25 to 4.50